scutter
|
| posted on 3/1/09 at 01:42 PM |
|
|
Type 9 gearbox seals
Folks, I've just recieved a set of seals for my type 9 gearbox, it developed a leak from the outshaft seal.
Just wondering if any one know where the other 2 seals go? the red seal is the output shaft.
ATB Dan.
The less I worked, the more i liked it.
|
|
|
|
|
bilbo
|
| posted on 3/1/09 at 01:46 PM |
|
|
I'm guessing, but I suspect the bigger of the two black ones is for the input shaft. The small one would then be for the speedo output?
I'll have a quick look in the manual....
Not very clear in the manual. I'm pretty sure that's what they are though. I can't think where else they might be from?
[Edited on 3/1/09 by bilbo]
---------------------------------------
Build Diary: http://bills-locost.blogspot.com/
Web Site: http://locost.atspace.com
|
|
|
prawnabie
|
| posted on 3/1/09 at 02:49 PM |
|
|
The little one is for where the selector rod enters the main gearbox casing from the tail.
HTH
Shaun
[Edited on 3/1/09 by prawnabie]
|
|
|
BearingKits
|
| posted on 3/1/09 at 03:58 PM |
|
|
The small seal is for the speedo drive gear,
the larger black one is for the input shaft.
www.Bearingkits.co.uk
Gearbox, Differential and Axle rebuild parts.
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
scutter
|
| posted on 3/1/09 at 04:22 PM |
|
|
Many Thanks Folks,
I feel slightly guilty now, why isn't there a list of registered traders? or add your self to the list of links so we can visit your shop.
ATB Dan.
The less I worked, the more i liked it.
|
|
|
scutter
|
| posted on 7/1/09 at 08:43 PM |
|
|
Just ordered a set of seals and gaskets for my V6 box, feel slightly better now
ATB Dan.
The less I worked, the more i liked it.
|
|
|
