austin man
|
| posted on 21/4/09 at 10:14 PM |
|
|
twin 40's
any one know what air jets etc I need for twin 40's on a 1.8 zetec ?? and how the f do I balance all 4. do they each have a sepersate screw ???
if so where the hellm is it I have manged so far to get an even mixture however the mixture screw is only out about 1/2 a turn at max.
I have a carb balancer which shows two chokes are measuring 6 and two measuring 7 at 1500rpm each carb having a reading of 6 and 7 respectively
Life is like a bowl of fruit, funny how all the weird looking ones are left alone
|
|
|
|
|
mookaloid
|
| posted on 21/4/09 at 10:31 PM |
|
|
Are the spindles twisted? there is no separate screw for each butterfly.
There is a separate mixture screw for each cylinder.
Theres a good tuning guide somewhere - I'll have a look and post it if I can find it
"That thing you're thinking - it wont be that."
|
|
|
mookaloid
|
| posted on 21/4/09 at 10:35 PM |
|
|
try here
Cheers
Mark
"That thing you're thinking - it wont be that."
|
|
|
.jpg)
