r1_pete
|
| posted on 2/7/09 at 05:53 PM |
|
|
Can anyone identify these throttle bodies??
Can anyone identify these throttle bodies for me, I was sold them as GSXR600K4, but I'm not sure, theyre 42mm bore on the engine sine, and 50mm
at the filter side.
I'm thinking they may be GSXR750K4/5 but can anyone help.
I've re-spaced them and taken the secondary butterflies out.
Image deleted by owner
Image deleted by owner
Cheers.
Pete.
|
|
|
|
|
big_wasa
|
| posted on 2/7/09 at 05:59 PM |
|
|
look like 750 k6 ?
|
|
|
oadamo
|
| posted on 2/7/09 at 07:22 PM |
|
|
theres a pic of GSXR 600 K4 throttle bodies in my archive they look diff to them.
adam
|
|
|
flak monkey
|
| posted on 2/7/09 at 07:29 PM |
|
|
Yep, gsxr 750 ones, but the later ones rather than the earlier singles
Sera
http://www.motosera.com
|
|
|
fatbaldbloke
|
| posted on 6/7/09 at 05:52 PM |
|
|
Agree with Flakkers above. Definitely not 600, too big, and early 750's are single units. My money's on late 750's, K4/K5,
although I'm not sure what those on the 1000 look like. (May do a bit of searching just for my own amusement.) .
[Edited on 6/7/09 by fatbaldbloke]
[Edited on 6/7/09 by fatbaldbloke]
|
|
|
flak monkey
|
| posted on 6/7/09 at 05:56 PM |
|
|
quote:
Originally posted by fatbaldbloke
Agree with Flakkers above. Definitely not 600, too big, and early ones are single units. My money's on late 750's, although I'm
not sure what those on the 1000 look like. (May do a bit of searching just for my own amusement.)
The GSXR 1000 and GSXR 750 throttle bodies are the same, so my research leads me to believe. Both 42mm bore at the engine end and about 50mm at the
filter end.
Sera
http://www.motosera.com
|
|
|
