FFTS
|
| posted on 2/3/10 at 10:47 PM |
|
|
How much to get a Pinto head skimmed??
ALL SORTED now.. Thanks
£25-£30 + vat in Chorley.
I need a pinto head skimming?
Do I look for a local engineers rather than a garage to keep the cost down?
How much should I expect to pay so I know I'm not getting ripped off?
[Edited on 3/3/10 by FFTS]
Chris.
|
|
|
|
|
Peteff
|
| posted on 2/3/10 at 11:15 PM |
|
|
Our local engineer where all the garages take their stuff charges £25 for a skim just to level the face off.
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
|
|
|
mitch2b
|
| posted on 2/3/10 at 11:31 PM |
|
|
25 30 quid wier street engineering in blackburn
HTH
Mitch
|
|
|
motorcycle_mayhem
|
| posted on 3/3/10 at 09:22 AM |
|
|
Local engineering firm here in Bude charged me £25 for skimming the head on the Volvo 940... within a thou of it's life (very badly corroded
after using the car for a year with a weeping gasket!).
|
|
|
will121
|
| posted on 3/3/10 at 12:26 PM |
|
|
take it direct to a engineering company not garage, although worth asking first as not all general enginering companies will have machine to do it.
Cost me £40 to have 25thou skimmed of a zetec head
|
|
|
Lozer49
|
| posted on 31/3/10 at 03:14 PM |
|
|
Hi, do you have a phone number or some contact details of the company you used to skim the pinto head thanks.
|
|
|
