locoboy
|
| posted on 22/3/10 at 07:35 AM |
|
|
Turning over by hand
Guys I have done my first ever timing belt change, how many crank revolutions will be required when turning it by hand to make sure I don't have
any clearance issues?
I don't want to not turn it over enough times then find out that one of the valves contacts the piston.
It's a 4 cylinder 8 valve.
Cheers,
ATB
Locoboy
|
|
|
|
|
Miks15
|
| posted on 22/3/10 at 07:50 AM |
|
|
one full cycle will be 2 turns.
|
|
|
r1_pete
|
| posted on 22/3/10 at 10:53 AM |
|
|
Yep 2 complete turns of the crank will prove no intereference, do a few more then re-check the tension is still correct.
|
|
|
