Benzine
|
| posted on 24/4/10 at 07:56 PM |
|
|
Making an exhaust
I'm at a point where I need to make an exhaust. I've made one myself before from mild steel that was going to go under my full body
conversion (so as it wouldn't be on display it didn't need to look good, and it didn't look great  ) So I'd like to make/get
made a stainless steel system.
I'm not sure whether to get it made by someone or make it myself. I can't TIG but i've MIG'd stainless before, and I'd
just be using it for tacking (and then get someone to TIG it all up)
The main factor in the decision is cost, otherwise I'd go straight for getting someone else to do it. If I got a load of 90 degree bends,
straight pipe and a metal cutting bandsaw then I'd still have money left over from the cost of getting it made, and have a bandsaw to add to my
collection of tools. But as i have a straight six I can't get collectors off the shelf. 4 into 1 collectors are all over the place, but 3 into
1s aren't last time I checked (i'd do it as 6 to 2 to 1 with 2 collectors) The collectors I made myself were like cones, easy enough to
make but looked a bit naff.
If I go for getting it made, are there many places that you can trailer my car there and get it done whilst i wait/same day? (to save 2 trips and 2
trailer hires)
|
|
|
|
|
blakep82
|
| posted on 24/4/10 at 08:06 PM |
|
|
6 cylinder BMWs are a useful source of 3-1 collectors. not particularly pretty, but they work. mine's mild steel tho i think...
i'm sure mines are more like headers than cast, but i've not looked for a while
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
twybrow
|
| posted on 24/4/10 at 08:08 PM |
|
|
You can buy 3-1 parts from a few places...
Try Here
|
|
|
blakep82
|
| posted on 24/4/10 at 08:12 PM |
|
|
ooh ^ how much? 
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
mangogrooveworkshop
|
| posted on 24/4/10 at 09:40 PM |
|
|
quote:
Originally posted by twybrow
You can buy 3-1 parts from a few places...
Try Here
50.05
Goods-Total £ 50.05
Delivery £ 15.00
Sub Total £ 65.05
VAT£ 11.38
Total £ 76.43
|
|
|
Benzine
|
| posted on 24/4/10 at 09:54 PM |
|
|
Two of them... £135.24 :/
|
|
|
MakeEverything
|
| posted on 24/4/10 at 10:09 PM |
|
|
Holy crap!! Thats mega expensive!
You can by the cones off ebay and shape them yourself?
Kindest Regards,
Richard.
...You can make it foolProof, but youll never make it Idiot Proof!...
|
|
|
