big-vee-twin
|
| posted on 16/5/10 at 04:11 PM |
|
|
Clutch pressure plate bolts
Hi All,
What are the reccomendations for the 6 bolts that secure the pressure plate to the fly wheel?
Duratec Engine is fitted, MS2 Extra V3 is assembled and tested, engine running, car now built. IVA passed 26/02/2016
http://www.triangleltd.com
|
|
|
|
|
DanP
|
| posted on 16/5/10 at 05:17 PM |
|
|
I bought a set of 'pressure plate bolts' from v8tuner and they were just 8.8 grade(or the imperial equivalent 'S' i think).
The flywheel/crank bolts were ARP specials though..
[Edited on 16/5/10 by DanP]
|
|
|
big-vee-twin
|
| posted on 16/5/10 at 05:47 PM |
|
|
8.8 ok thanks
Duratec Engine is fitted, MS2 Extra V3 is assembled and tested, engine running, car now built. IVA passed 26/02/2016
http://www.triangleltd.com
|
|
|
snapper
|
| posted on 16/5/10 at 05:50 PM |
|
|
There are usually some locating dowles for the pressure plate, these take a lot of the shock load, but as always the better the bolt the better the
safety margin.
I eat to survive
I drink to forget
I breath to pi55 my ex wife off (and now my ex partner)
|
|
|
