Alfa145
|
| posted on 8/1/11 at 09:17 AM |
|
|
XFlow Water Temp Sender Thread
Hi,
Can someone confirm if the thread in the head of a 1.6 Xflow for the temp sender is 1/8 NPT?
And if so does anyone know a cheaper place than here to get a new sender for my smiths guage?
https://www.europaspares.com/GAUGES/SENDERS_and_SENSORS/SMITHS_1_8_NPT_WATER_TEMPERATURE_SENDER___TT3001_8N__1891.html
Cheers
|
|
|
|
|
snapper
|
| posted on 8/1/11 at 09:48 AM |
|
|
£10 is cheap!!!
You might save the vat on eBay
Look at Rally Design
I eat to survive
I drink to forget
I breath to pi55 my ex wife off (and now my ex partner)
|
|
|
wonderfulweasel
|
| posted on 8/1/11 at 10:32 AM |
|
|
I got my last one from the local Ford dealer, can't remember how much it was as it was probably about 5 years ago!
The ones on ebay aren't much cheaper:
FORD ESCORT MK1,2.ENG TEMPERATURE SENSOR on eBay (end time 24-Jan-11 21:31:47 GMT)
|
|
|
Neville Jones
|
| posted on 8/1/11 at 11:17 AM |
|
|
If it's a Ford Europe, it's 1/8 bspt. One tpi difference, as I recall.
The thread in the water outlet for a sensor, is 1/2" bsps. At least, that's what the one I got off ebay was.
Cheers,
Nev.
|
|
|
