Norfolkluegojnr
|
| posted on 24/1/11 at 01:07 PM |
|
|
CVH Exhaust to Zetec adapter flange.....
Anyone had any experience of these? zetec turbo n/a exhaust manifold adaptor plate XR/RS/SI on eBay (end time 26-Jan-11 21:29:00
GMT)
A locost answer to my exhaust for the Zetec transplant would be helpful, but I don't want to spend £40 on something that is a
'bodge'.
Anyone had any experience? Or can offer an alternative?
Cheers
|
|
|
|
|
whitestu
|
| posted on 24/1/11 at 03:26 PM |
|
|
I fitted a CVH exhaust to my Zetec. I just cut a Zetec flange off a Focus exhaust manifold and welded this to the CVH flange [with a bit of cutting
& grinding to allow access to the stud holes.
I cna't see why this wouldn't work if you don't want to weld it up.
Stu
|
|
|
Norfolkluegojnr
|
| posted on 24/1/11 at 03:40 PM |
|
|
Thanks Stu.
can't weld unfortunately (must remedy this) so i think its worth a try.
I'll report back if its any good.
|
|
|
lotusmadandy
|
| posted on 24/1/11 at 05:39 PM |
|
|
I have bought one of his adaptor plates.the quality is excellent
and a good price i thought.Like yourself i wanted to use a
cvh turbo manifold and didnt want to butcher anything.
Andy
|
|
|
Norfolkluegojnr
|
| posted on 24/1/11 at 07:12 PM |
|
|
Thanks Andy.
I'll give it a go, and post up some pics further down the line.
|
|
|
lotusmadandy
|
| posted on 24/1/11 at 07:40 PM |
|
|
I'll take some tomorrow and post them.
Andy
|
|
|
