neilp1
|
| posted on 26/1/11 at 04:42 PM |
|
|
Rally Design Duratec Bellhousing
Does anyone know if the Duratec bellhousing rally design sell is for a cable or hydraulic clutch?
It doesn't tell you in the description!
|
|
|
|
|
redeye
|
| posted on 26/1/11 at 05:03 PM |
|
|
judging from the picture and the fact that they sell the slave cylinder (for stupid money) Id believe its for a hydraulic clutch
Let me know if you do buy one of these
Im fitting a duratec and thinking about buying this bellhousing too
|
|
|
big-vee-twin
|
| posted on 26/1/11 at 05:05 PM |
|
|
I think its a Hydraulic one, probabily best to ring them
RWD motorsports do both types if you need to see pics
clickylinky
Duratec Engine is fitted, MS2 Extra V3 is assembled and tested, engine running, car now built. IVA passed 26/02/2016
http://www.triangleltd.com
|
|
|
coozer
|
| posted on 26/1/11 at 05:10 PM |
|
|
More info at Retro Ford. They sell the bellhousing, flywheel and release bearing. All you need is deep pockets!
http://retroford.co.uk/retro-shop/product_info.php?cPath=22&products_id=150
1972 V8 Jago
1980 Z750
|
|
|
big-vee-twin
|
| posted on 26/1/11 at 05:20 PM |
|
|
The RetroFord one is made by Titan motorsports.
Duratec Engine is fitted, MS2 Extra V3 is assembled and tested, engine running, car now built. IVA passed 26/02/2016
http://www.triangleltd.com
|
|
|
FASTdan
|
| posted on 28/1/11 at 06:42 AM |
|
|
Can't advise on rally design but as an alternative I can highly recommend rwd motor sports items, well priced and a nice bloke to speak to.
NEW danST WEBSITE NOW LIVE! Bike carbs, throttle bodies and more......
http://www.danstengineering.co.uk/
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
