Trollyjack
|
| posted on 15/5/11 at 07:04 PM |
|
|
Rear Diff english axle
Hi
The dif I have bought seams to have a differant ratio to many
alot of people are fitting IE 3.89:1 Dif
The one I have seams to have
9 teeth in the Pinion
and 33 on the Crown
This should give better acelaration is that right
Any one know what the Diff I have got is likly to be from
[Edited on 15/5/11 by Trollyjack]
TrollyJack
|
|
|
|
|
jonrotheray
|
| posted on 15/5/11 at 07:17 PM |
|
|
English Diff
English ratios were normally
9/40=4.44
8/33=4.125
9/35=3.89
9/34=3.77
11/39=3.54
I've been looking for a 3.54 for my 1300 xflow locost...
But all I've got is a 4.125.
Jon
|
|
|
daviep
|
| posted on 15/5/11 at 08:23 PM |
|
|
Are you sure it's definately a ford english diff, 3.67 is not a ratio I've heard of?
A 3.67 will give less acceleration and a higher top speed than a 3.89
Regards
Davie
“A truly great library contains something in it to offend everyone.”
|
|
|
Trollyjack
|
| posted on 16/5/11 at 07:51 PM |
|
|
Sorry
error in typing
8 pinnion
33 Crown wheel
Only planning on using it as a Trackday Car
TrollyJack
|
|
|
jonrotheray
|
| posted on 16/5/11 at 07:57 PM |
|
|
4.125 - should give good acceleration
|
|
|
