Fishface
|
| posted on 30/5/11 at 10:50 AM |
|
|
bike carb gasket to zetec
I have a set of bike carbs on a bogg bros manifold for a zetec. I know they sell them but what do people use? Is it cheaper to just use a motor
factors supplied standard zetec one?
Thanks
|
|
|
|
|
r1_pete
|
| posted on 30/5/11 at 10:56 AM |
|
|
I made my own from 0.75mm gasket paper, no problems at all, new owner has done a few thou too with no issues.
|
|
|
whitestu
|
| posted on 30/5/11 at 10:58 AM |
|
|
quote:
I made my own from 0.75mm gasket paper, no problems at all, new owner has done a few thou too with no issues
+1
Stu
|
|
|
Fishface
|
| posted on 30/5/11 at 11:20 AM |
|
|
That sounds cheap, do you just get it from the motor factor?
|
|
|
big_wasa
|
| posted on 30/5/11 at 11:40 AM |
|
|
quote:
Originally posted by whitestu
quote:
I made my own from 0.75mm gasket paper, no problems at all, new owner has done a few thou too with no issues
+1
Stu
+ 2 but mines 1mm. If you get over this way I will give you a bit. I bought a roll on ebay. Do you live in Downham' or one of the villages I
some times get over that way with work. Often around wimbotsham ect
|
|
|
