U2U | Member List | Search | Photo Archive | Chat | Links | Shop
Not logged in [Login - Register]
LocostBuilders » Forum » Engine & Transmission » Crossflow expansion tank required for Phoenix MIG Welders & ARC Welders at MachineMart.co.uk   go to bottom
Printable Version | Subscribe | Add to Favourites
 New Topic New Poll New Reply
Author: Subject: Crossflow expansion tank required for Phoenix
philfingers
Builder






Posts 151
Registered 16/6/11
Location Kidderminster, Worcs.
Member Is Offline


Building: 'fiddling with a R1 Phoenix
posted on 16/6/11 at 03:35 PM Reply With Quote
Crossflow expansion tank required for Phoenix

look for ideas!
need an expansion tank, currently there isn't one! Ideas for both type/source and where to mount it please!
pics useful. Not entirely sure how to hook it up if it's a two hose type. My old striker had one with a single hose from the XR2 thermostat housing, tall cylindrical one in plastic [no idea what it was off]. I had another in my Westfield (also cross flow) but can't remember how it was hooked up but it had two hoses to the engine
View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


 LocostBuilders » Forum » Engine & Transmission » Crossflow expansion tank required for Phoenix go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.