lewis
|
 posted on 24/1/12 at 07:00 PM |
|
|
first engine start!!!
well a mate and i finished wiring up my megajolt this morning(2.0l zetec-zx6r bike carbs) and turned it over,it started first time ! i was surprised
to say the least a few issues but iu will ask about them one at a time,one question is where do i go from here?? although it runs its not set up and
the carbs need fine tuning etc so how do i do that? or where could i take it im in worthing west sussex any help or info on setting up would be great
someone on here kindly sent me a map for my setup and that side seems to be working well, so its carb setup really i think.lewis.
I am a driving god!..........sort of
|
|
|
|
|
coozer
|
| posted on 24/1/12 at 07:59 PM |
|
|
Get an AFR setup and tune it yourselve, dead easy..
1. Airscrews for idle
2. Needle height for midrange
3. Main jet size for top end
Make sure the air bleed is blocked to prevent it running lean..
1972 V8 Jago
1980 Z750
|
|
|
