dave_424
|
| posted on 29/5/13 at 08:45 PM |
|
|
ZX9/10r oil gallery plug threads
I'm trying to do my turbo oil feed and am taking oil from the oil gallery plug on the side of the motor. I have been told this is 3/8 NPT but
the fitting I bought looks slightly larger and will only thread in about 3 or 4 turns, after tightening I took it out and found no flattened threads
or even any of the anodizing scratched off. Is this okay? anyone know what the threads are on the plug? most likley the same for zx10 as well.
Thanks
Dave
|
|
|
|
|
twybrow
|
| posted on 30/5/13 at 04:31 AM |
|
|
Not a ZX9, but this thread may help you...
ZX12 Oil Gallery Info
|
|
|
minitici
|
| posted on 30/5/13 at 07:45 AM |
|
|
I think NPT is a tapered thread therefore it would go tight after a few turns.
|
|
|
