Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Duratec - head swap
cosmicicecreamman

posted on 30/1/20 at 05:19 PM Reply With Quote
Duratec - head swap

Evening all,

I have a passing valve on my 2.0ltr Ford Duratec. I have a spare engine with a good head. They're both the high port heads.

Question I have is - can Duratec heads be swapped over or should the head that came with the block from factory be repaired?

Years ago I used to swap around engine components on various CVH, Pinto, x-flow, etc, but wasnt sure how the modern engine would accept another head.

Thanks

Stephen

View User's Profile View All Posts By User U2U Member
snapper

posted on 30/1/20 at 07:05 PM Reply With Quote
You can swap heads over.
The high port Duratec head can be fitted to the Mondeo/Focus low port head engine and vis vers





I eat to survive
I drink to forget
I breath to pi55 my ex wife off (and now my ex partner)

View User's Profile View All Posts By User U2U Member
chillis

posted on 30/1/20 at 07:12 PM Reply With Quote
so long as they are both from engines of the same capacity eg a 2.0l head from a 2.0l engine





Never under estimate the ingenuity of an idiot!

View User's Profile View All Posts By User U2U Member
cosmicicecreamman

posted on 31/1/20 at 09:27 AM Reply With Quote
Excellent!!!

Thank you gents.

View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.