shindha
|
| posted on 16/4/21 at 10:07 AM |
|
|
Live axle help needed
Hello does anyone know what size bolts / screws do I need to attach the half shaft flanges (No 13) to the axle case.
[img]
 
axle
[/img]
|
|
|
|
|
theconrodkid
|
| posted on 16/4/21 at 10:24 AM |
|
|
pretty sure they are 8mm if metric and 5/16 if unf
who cares who wins
pass the pork pies
|
|
|
obfripper
|
| posted on 16/4/21 at 10:51 AM |
|
|
5/16 unc bolts (3 dash tensile strength) on my halfshaft flanges, the diff casing flange uses unf nuts.
Dave
[Edited on 16/4/21 by obfripper]
|
|
|
rusty nuts
|
| posted on 16/4/21 at 04:44 PM |
|
|
Didn’t the mark 1 use 5/16” UNF and the mark2 8mm?
|
|
|
shindha
|
| posted on 16/4/21 at 05:09 PM |
|
|
Thanks everyone it was 5/16 UNF
|
|
|
.jpg)
