Dave Bailey
|
| posted on 25/10/05 at 09:51 PM |
|
|
Bolt size Type 9 gearbox to bell housing?
Because I am a lazy 'person' does anyone know the size of the bolts I need to bolt a type 9 to its bell housing? Whilst I am here also
what size bolts to bolt the bell housing to a 2.0 Zetec. It's cold outside and dark so I though easier to ask the question....
[Edited on 25/10/05 by Dave Bailey]
|
|
|
|
|
NS Dev
|
| posted on 25/10/05 at 09:59 PM |
|
|
M12 x 40ish x 1.25 (metric medium fine) IIRC, sombody come on and back me up!
40ish will be plenty long enough, won't hurt if they are a touch too long, they go into open space anyway.
no idea on the engine ones but I'd bet they are std M12 (M12 x 1.5)
[Edited on 25/10/05 by NS Dev]
|
|
|
Dave Bailey
|
| posted on 25/10/05 at 10:00 PM |
|
|
Thanks!
and I'm still as warm as toast!
|
|
|
Dusty
|
| posted on 25/10/05 at 10:26 PM |
|
|
Bellhousing to engine are M10x40x1.5. Took my engine out today so I've just seen them. Bellhousing to box are as NSDev sez.
|
|
|
NS Dev
|
| posted on 25/10/05 at 10:34 PM |
|
|
ahh shucks, think I am wrong on the bellhousing to box ones then!
They are M12 x 40ish by 1.5, not 1.25 then!
They are one step finer than std m12, not the finest M12. For some reason I thought std M12 was 1.5, not 1.75!
sorry, too much beer!
|
|
|
skodaman
|
| posted on 26/10/05 at 05:57 PM |
|
|
Bolt Size
Does anyone know the same thing for 1.3 Crossflow to bellhousing bolts?
Skodaman
|
|
|
