oliwb
|
| posted on 23/11/05 at 05:08 PM |
|
|
36-1 Trigger Wheels
Does anyone know of a good place to get hold of one with a centre, and whats the best way to fit them?? I went and bought the lot together including
ht leads on ebay for £40 (not too bad I thought) except the trigger wheel I got with it is a 4.5 inch ring type one and can't see any easy way
of mounting onto my pinto! Gonna sell this one on the bay I think in order to fund the new one but are there any ones that work better than
another??? Any comments greatly recieved.....Oli.
If your not living life on the edge you're taking up too much room!
|
|
|
|
|
rayward
|
| posted on 23/11/05 at 05:18 PM |
|
|
how about these
linky
Ray
|
|
|
oliwb
|
| posted on 23/11/05 at 05:36 PM |
|
|
yeh have been looking at those and e-mailed the guy (not you is it??) Bit pricey for me....am a poor impoverised student (and besides my loan
hasn't come through yet!  ) It's the postage thats the killer actually...apart from that they look perfect.....whats the best way to
fix them onto the crank pulley so that they can't rotate??? Cheers Oli.
If your not living life on the edge you're taking up too much room!
|
|
|
Surrey Dave
|
| posted on 23/11/05 at 05:41 PM |
|
|
Some modify the one that is fitted as standard to the 1800cvh .....
|
|
|
paulf
|
| posted on 23/11/05 at 06:04 PM |
|
|
There is a bent tin trigger wheel that ford dealers stock apparently , I dont know which cars it was fitted too, but think it may be granada and some
CVH sierras.Ive seen some pics of it on web sites and it is apparently only about £14.
I used the wheel off of an 1800cvh and fitted it to a homemade pulley.
Paul
[Edited on 23/11/05 by paulf]
|
|
|
oliwb
|
| posted on 23/11/05 at 06:16 PM |
|
|
Thanks guys thats the one I had seen too that would be easy to fit I reckon....will try and chase it up sometime soon. I'll let you know how I
get on....Oli.
If your not living life on the edge you're taking up too much room!
|
|
|
lsdweb
|
| posted on 23/11/05 at 09:41 PM |
|
|
I agree - 1800 CVH - same as I used.
|
|
|
paulf
|
| posted on 26/11/05 at 10:00 PM |
|
|
Theres an article in Decembers PPC. They mounted one of these wheels to a crossflow pulley. Looks a bit of a bodge to me but obviously works , the
part number is quoted as Ford number1078767 cost approx £13 as fitted to DOHC and possibly CVH sierras and granadas.
Paul.
|
|
|
.jpg)
