ayoungman
|
| posted on 18/1/06 at 06:37 PM |
|
|
engine mounts
Engine mounts. Could be useful to someone !
clicky
"just like that !"
|
|
|
|
|
muzchap
|
| posted on 18/1/06 at 07:33 PM |
|
|
You might also consider the Fiesta Gearbox mountings...
They have the lugs in to stop twisting and are nice and square 
Personal preference though I suppose
[Edited on 18/1/06 by muzchap]
|
|
|
UncleFista
|
| posted on 19/1/06 at 01:54 AM |
|
|
How much are the festa mounts ?
Are Ford dealers the only place to get 'em ?
(the standard crossflow mounts have too much flex...)
Tony Bond / UncleFista
Love is like a snowmobile, speeding across the frozen tundra.
Which suddenly flips, pinning you underneath.
At night the ice-weasels come...
|
|
|
Mix
|
| posted on 19/1/06 at 07:12 AM |
|
|
My Fiesta mounts were about £7 each from the local motor factors
Mick
|
|
|
UncleFista
|
| posted on 19/1/06 at 01:42 PM |
|
|
Cheers Mix 
Tony Bond / UncleFista
Love is like a snowmobile, speeding across the frozen tundra.
Which suddenly flips, pinning you underneath.
At night the ice-weasels come...
|
|
|
cornishrob
|
| posted on 19/1/06 at 07:06 PM |
|
|
if you are refuring to mk2 or mk3 fiesta mounts i would recomend spending the 24 quid on the diesel items,
I have had 7 fiestas and have had to replace mounts on 5 of them. there a common weak point.
|
|
|
britishtrident
|
| posted on 19/1/06 at 08:04 PM |
|
|
Land-Rover mount is best but normal Fiesta mounts are fine --- all FWD mounts get much more hammer than rwd mounts --- because final drive gear ratio
they get 3 or 4 times the torque.
Fiesta mounts can also fail because some pratt Mechanics/MOT testers/tyre fitters jack them up under the engine/gearbox.
|
|
|
oliwb
|
| posted on 19/1/06 at 08:20 PM |
|
|
Yeh was about to suggest the landy one (not cos of any particular techncal reason) but because they about £4 each.....Oli.
If your not living life on the edge you're taking up too much room!
|
|
|
