Johnmor
|
| posted on 24/1/06 at 09:03 PM |
|
|
Exhaust Parts
Does anyone know a good supplier of exhaust parts, I'm looking for stainless tube, flexy pipe and standard boxes. Going to make my own
system.
As i'm "up north" possibly mail order.
Cheers
|
|
|
|
|
Deckman001
|
| posted on 24/1/06 at 09:05 PM |
|
|
RSR Tyres, do that sort of thing down here in the south, not sure if theres any places of theres up north 
Jason
|
|
|
ecosse
|
| posted on 24/1/06 at 09:10 PM |
|
|
The best I have found is Milner off road, have a look.
Cheers
Alex
|
|
|
daviep
|
| posted on 24/1/06 at 09:46 PM |
|
|
Jetex
Never bought anything from these guy's but spoke to them at The Autosport show and they were very helpful.
JETEX
|
|
|
Johnmor
|
| posted on 24/1/06 at 10:41 PM |
|
|
Thats great,
Eurospares were going to be a fortune.
Cheers
|
|
|
Chippy
|
| posted on 24/1/06 at 11:28 PM |
|
|
I used the Jetex stuff, Silencers, pipe etc,
good quality gear.
|
|
|
Mix
|
| posted on 25/1/06 at 07:08 AM |
|
|
There's a place in Turriff with a machine to bend and flare tubes to order. They make custom stainless systems, phone Turriff Tyres and ask to
speak to Julian.
Mick
|
|
|
owelly
|
| posted on 26/1/06 at 08:26 PM |
|
|
What about weldy stuff? I'm too tight to pay for swages and then cut them off!
http://www.ppcmag.co.uk
|
|
|
owelly
|
| posted on 27/1/06 at 02:57 PM |
|
|
I just been to local fab shop and ordered 6 2" bends and 2mtrs of straight tube in s/s for £60 all in. I hope they havn't ripped my keks
off!!
http://www.ppcmag.co.uk
|
|
|
britishtrident
|
| posted on 27/1/06 at 05:28 PM |
|
|
Avoid flexy pipe if you can it is nothing but trouble.
|
|
|
omega 24 v6
|
| posted on 27/1/06 at 05:55 PM |
|
|
As per Mix reply. They were (are) agents for BK Power flow exhausts, and I know a couple of guys with their stainless steel systems, that highly
recommend them.
|
|
|
