Mix
|
| posted on 9/3/03 at 10:38 AM |
|
|
Another Zetec to MT75 question
The bell housing locating dowels on my 97 2.0 Zetec are 15.5mm in dia, the corresponding holes in my MT75, (removed from a 92 Sierra twin cam) are
12mm dia. Does anybody know if I can fit smaller dowels or will I have to modify the bell housing?
|
|
|
|
|
theconrodkid
|
| posted on 9/3/03 at 11:39 AM |
|
|
since the dowels line up the box n block you are better off drilling the box to 15.5mm or making stepped dowels
who cares who wins
pass the pork pies
|
|
|
locost7-online.com
|
| posted on 9/3/03 at 11:52 AM |
|
|
I agree with drilling to fit larger dowels
Locost Xflow 150bhp injected! Sold :-(
Facebook blog https://www.facebook.com/Johns-Tiger-Avon-Build-814223212056368/
PLEASE NOTE THIS MEMBER IS NOT A TRADER.
|
|
|
