02GF74
|
| posted on 22/3/06 at 03:06 PM |
|
|
later zetec heads fit older zetec engines?
do the later (shim adjustable/solid follower) heads fit the older zetec ehngine, the ones that had hydraulic followers? (thinking about it
can't see why not......)
|
|
|
|
|
stevebubs
|
| posted on 22/3/06 at 03:19 PM |
|
|
supposedly but no-one has proven it....
|
|
|
Danozeman
|
| posted on 22/3/06 at 03:37 PM |
|
|
Are talking older as in silver top and newer as in Black top?
If so i have been told they arent interchangable.
Dan
Built the purple peril!! Let the modifications begin!!
http://www.eastangliankitcars.co.uk
|
|
|
britishtrident
|
| posted on 22/3/06 at 07:52 PM |
|
|
The cam belt takes a different route.
|
|
|
02GF74
|
| posted on 22/3/06 at 09:21 PM |
|
|
quote:
Originally posted by britishtrident
The cam belt takes a different route.
pray tell me more. both the cylinder head will have cam gears at the front and probalbyu in the same place so even if the belt is routed differently
below, surely that should not affect cam gear operations? * (unless they spin in differnt directions... but that would be strange thing to do...)
*(what I mean, without a picture is t he belt runs up to the first cam gear over the top to the other gear and then back down)
|
|
|
zetec
|
| posted on 22/3/06 at 09:28 PM |
|
|
Why bother? Spend the money on some 285 cams and you will see another 20bhp, suspect head change will give very little improvment.
" I only registered to look at the pictures, now I'm stuck with this username for the rest of my life!"
|
|
|
