theconrodkid
|
| posted on 31/3/06 at 01:55 PM |
|
|
flywheel
someone told me a CVH flywheel MAY fit a 2.0 zetec.
ive seen one,it looks lighter,anyone know for deffo before i get my hands dirty for nowt?
who cares who wins
pass the pork pies
|
|
|
|
|
MikeR
|
| posted on 31/3/06 at 02:07 PM |
|
|
won't be for nout if you share the expience with us lot 
|
|
|
givemethebighammer
|
| posted on 31/3/06 at 02:41 PM |
|
|
the escort 1.8 16v (zetec) one fits and is loads lighter than the 2.0L zetec one. Is the CVH one lighter than this ?
|
|
|
theconrodkid
|
| posted on 31/3/06 at 03:57 PM |
|
|
the cvh one looks smaller ie lighter,its free but ill get dirty and use 5 mins of my life removing it.you can do a lot in 5 mins
who cares who wins
pass the pork pies
|
|
|
DorsetStrider
|
| posted on 31/3/06 at 04:09 PM |
|
|
A person can do a lot TWICE in 5 minutes....erm.....allegedly.....erm.....so I'm told.
d'OH!
Who the f**K tightened this up!
|
|
|
MikeR
|
| posted on 31/3/06 at 04:38 PM |
|
|
what, remove two flywheels - now thats just bragging
|
|
|
emsfactory
|
| posted on 31/3/06 at 05:25 PM |
|
|
quote:
Originally posted by DorsetStrider
A person can do a lot TWICE in 5 minutes....erm.....allegedly.....erm.....so I'm told.
d'OH!
Yeh, but you need powerfull forearms.
|
|
|
MikeR
|
| posted on 31/3/06 at 05:58 PM |
|
|
i thought these flywheels weren't that heavy
|
|
|
rusty nuts
|
| posted on 31/3/06 at 06:12 PM |
|
|
Does the CVH flywheel have the 36 teeth for crankshaft position? None that i've seen have. Think I have an 1800 Zetec flywheel somewhere , bit
rusty but OK if you need one
|
|
|
britishtrident
|
| posted on 31/3/06 at 06:47 PM |
|
|
quote:
Originally posted by rusty nuts
Does the CVH flywheel have the 36 teeth for crankshaft position? None that i've seen have. Think I have an 1800 Zetec flywheel somewhere , bit
rusty but OK if you need one
1800 zetec flywheel is the best bet.
Some CVH flywheels have 36-1 but ISTR only on late models also various clutches were used on the CVH and it isn't always easy to match some
to a 23 spline input shaft -- of a type 9 of course if you are using an MT75 it is different again.
|
|
|
theconrodkid
|
| posted on 31/3/06 at 06:50 PM |
|
|
rusty me old mate,il have the flywheel
who cares who wins
pass the pork pies
|
|
|
rusty nuts
|
| posted on 31/3/06 at 07:25 PM |
|
|
It's yours Conrod ,when/how do you want it ? Can get it to Lingfield in Surrey after Easter if thats any help or Stoneleigh?
|
|
|
Mansfield
|
| posted on 31/3/06 at 07:51 PM |
|
|
This thread any use?
http://locostbuilders.co.uk/viewthread.php?tid=40516
1992 CFi 1.6 Sierra.
|
|
|
theconrodkid
|
| posted on 1/4/06 at 06:59 AM |
|
|
rusty,ill be at stonleigh,you have u2u...note to myself,hire artic to bring back the stuff ill be buying there
who cares who wins
pass the pork pies
|
|
|
.jpg)
