Krismc
|
| posted on 21/6/06 at 04:19 PM |
|
|
Fuel hose and clips!
2 meters of 6mmID fuel hose and 6 clips
£11.00
this is bloody expensive, what do people think??
Built, Ivaed, Drove and now Sold - 2011 MNR VORTX RT+ 2000cc Zetec on R1 Throttle boddies.
|
|
|
|
|
Snuggs
|
| posted on 21/6/06 at 05:19 PM |
|
|
I got 2m of 8mm id at Newark for £5.
----------------------------------------------------------------------------------------------------
http://www.topcashback.co.uk/ref/snuggstcb
Spider pig, spider pig, does whatever a spider pig does.
I doubt therefore I may be.
Luposlipophobia : Fear of being chased by wolves around a freshly waxed kitchen floor, while wearing only socks on your feet.
My mind not only wanders, sometimes it leaves completely!
http://www.venganza.org
http://www.jesusandmo.net/
http://www.snuggs.co.uk
|
|
|
cryoman1965
|
| posted on 21/6/06 at 09:39 PM |
|
|
1 mtr 8mm id fuel hose, 6x fuel hose clips, 1 x in line fuel filter. £5
Totton motor factors.
|
|
|
ned
|
| posted on 21/6/06 at 09:43 PM |
|
|
microbore copper pipe from screwfix  
beware, I've got yellow skin
|
|
|
Krismc
|
| posted on 22/6/06 at 02:44 PM |
|
|
ah nutsack to the one i was looking at then
Built, Ivaed, Drove and now Sold - 2011 MNR VORTX RT+ 2000cc Zetec on R1 Throttle boddies.
|
|
|
JB
|
| posted on 23/6/06 at 06:21 AM |
|
|
Cost Of Bits
quote:
Originally posted by Krismc
2 meters of 6mmID fuel hose and 6 clips
£11.00
this is bloody expensive, what do people think??
I think thats OK.
You should try plumbing in braided with alloy fittings (Aeroquip).........
John
|
|
|
andyharding
|
| posted on 23/6/06 at 12:03 PM |
|
|
http://cgi.ebay.co.uk/1-4-6mm-ID-FUEL-DIESEL-HOSE-x-10-metres-New_W0QQitemZ220000892951QQihZ012QQcategoryZ9886QQrdZ1QQcmdZViewItem
Are you a Mac user or a retard?
|
|
|
