theconrodkid
|
| posted on 5/10/06 at 07:01 PM |
|
|
zetec exhaust flange
was someone on here making them? ill be needing one soon
and no i am not filing one out from a plank of unyeilding metal
who cares who wins
pass the pork pies
|
|
|
|
|
DIY Si
|
| posted on 5/10/06 at 07:15 PM |
|
|
Well use the hacksaw then!
“Let your plans be dark and as impenetratable as night, and when you move, fall like a thunderbolt.”
Sun Tzu, The Art of War
My new blog: http://spritecave.blogspot.co.uk/
|
|
|
Surrey Dave
|
| posted on 5/10/06 at 07:44 PM |
|
|
There you go ..............
http://cgi.ebay.co.uk/ZETEC-LASER-CUT-EXHAUST-MANIFOLD-PLATE-8MM_W0QQitemZ300034019179QQihZ020QQcategoryZ100921QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
|
|
|
mad4x4
|
| posted on 5/10/06 at 10:19 PM |
|
|
A Company called Custom Chrome (do a google) sells em they are in naueton(SP) I think
Scot's do it better in Kilts.
MK INDY's Don't Self Centre Regardless of MK Setting !
|
|
|
NS Dev
|
| posted on 6/10/06 at 07:37 AM |
|
|
8mm flange is on the thin side for an exhaust flange, will curl quite a bit when welded. Should be ok but 10mm would be good if you have the option.
Retro RWD is the way forward...........automotive fabrication, car restoration, sheetmetal work, engine conversion
retro car restoration and tuning
|
|
|
