Simon
|
| posted on 24/11/06 at 11:44 PM |
|
|
Exhaust can end caps cone plotter?
Chaps,
Need to remake my exhausts (in stainless) but want to make some nice silencer end caps.
I have seen links on here to someone/where that will allow me to input my hole size/can size and taper and print of a template.
Unfortunately I can't find it!!!
Any suggetsions?
Cheers very much
ATB
Simon
|
|
|
|
|
DavidM
|
| posted on 25/11/06 at 12:04 AM |
|
|
I don't know the link you are talking about, but I can do that. If you can open autocad files let me know the sizes and I'll knock one up
for you. You'll also be able to see how to do it.
David
Proportion is Everything
|
|
|
MikeRJ
|
| posted on 25/11/06 at 01:10 AM |
|
|
If you like maths then this is what you need to do:
http://centraledesmaths.uregina.ca/QQ/database/QQ.02.06/phil1.html
Found a semi-automated solution, you still need to draw the template!
http://perso.orange.fr/jean-paul.davalan/calc/cone/cone-en.html
And finaly something that prints a template! The limited free version appears to do what you want: http://www.tyharness.co.uk/cones/cones.htm
[Edited on 25/11/06 by MikeRJ]
|
|
|
