welderman
|
| posted on 15/1/07 at 01:30 PM |
|
|
919 blade, jumping out of gear..
Keeps on poping out of 3rd gear under HARD throttle, does it sound like the selector fork is bent or could it be worse. .
Is it an engine out job too.
Thank's, Joe 
I don't stalk people
http://www.locostbuilders.co.uk/forum/23/viewthread.php?tid=172301
Back on with the Fisher Fury R1
|
|
|
|
|
David Jenkins
|
| posted on 15/1/07 at 02:08 PM |
|
|
Your avatar looks like she's popping out as well! Phew!
Sorry - don't know what happened there - mind wandered...
David
|
|
|
Phil.J
|
| posted on 15/1/07 at 02:09 PM |
|
|
Souds like worn dogs to me. Engine out and new parts in box I'm afraid. (This is assuming you've checked the obvious things like the
engine flexing in the chassis and loading up gearchange mechanism).
ATB
Phil
|
|
|
smart51
|
| posted on 15/1/07 at 02:46 PM |
|
|
My old R1 engine started to do this in 2nd. I had the parts replaced. The dogs were very rounded and the selector fork was bent. The mechanic who
repaired it said the bent fork was not pushing the gears together enough. this in time caused the dogs to round off.
|
|
|
Hellfire
|
| posted on 15/1/07 at 09:02 PM |
|
|
quote:
Originally posted by welderman
Keeps on poping out of 3rd gear under HARD throttle, does it sound like the selector fork is bent or could it be worse..
Is it an engine out job too.
Sounds like engine out and a gearbox rebuild to me Joe. Most likely that the dogs have rounded off...
Phil
|
|
|
flak monkey
|
| posted on 15/1/07 at 09:03 PM |
|
|
*Tongue firmly in cheek*
Thats what you get for putting a bike engine in a half tonne car 
*ducks*
Sera
http://www.motosera.com
|
|
|
coozer
|
| posted on 15/1/07 at 09:24 PM |
|
|
Likely the selector fork is goosed. Dont wait until it falls out and knackers a rod like Denoe did
1972 V8 Jago
1980 Z750
|
|
|
welderman
|
| posted on 15/1/07 at 09:40 PM |
|
|
Going to take the engine out tomorrow, get a friend to sort it out whilst i look into turbo mods and the such like.. And think i will change to a
cable gear change too.
thanks for the reply guys, suppose thats what this forums about. Ta....
Thank's, Joe
I don't stalk people
http://www.locostbuilders.co.uk/forum/23/viewthread.php?tid=172301
Back on with the Fisher Fury R1
|
|
|
