Stewie Griffin
|
| posted on 25/1/07 at 09:19 AM |
|
|
Ford Clutch plate
Im looking for a ford clutchplate to meet my MT-75 (23 splines). It has to be 215mm wide and needs to hold to bout 240 bhp. Anyone know where I can
get that?
Cheers
Stew
If it doesn't exist, create it yourself
|
|
|
|
|
RazMan
|
| posted on 25/1/07 at 09:20 AM |
|
|
I think the standard Mondeo one is good up to 250bhp 
Cheers,
Raz
When thinking outside the box doesn't work any more, it's time to build a new box
|
|
|
Syd Bridge
|
| posted on 25/1/07 at 10:27 AM |
|
|
It's not HP, but TORQUE that kills the clutches.
Try an Transit clutch. Beefier than a car type.
Cheers,
Syd.
|
|
|
Stewie Griffin
|
| posted on 25/1/07 at 03:47 PM |
|
|
i'll be looking at around 280nm of torque which is like 210 lb/ft. do you think a transit clutchplate can take that? and that one is 215mm wide
and will fit a MT75?
cheert
If it doesn't exist, create it yourself
|
|
|
