02GF74
|
| posted on 13/2/07 at 11:41 AM |
|
|
anyone recognise this supercharger?
pics:
apparently is off a mr2; would it be toytota's own make/design or a generic supercharger that is found on other cars? (eaton perhaps?)
and I take it the oval shaped hole on the right, bottom pic, is the outlet?
|
|
|
|
|
TimC
|
| posted on 13/2/07 at 12:00 PM |
|
|
If it's off an MR2, I'd imagine that it's the Mark 1 SC model i.e. attached to a 4age derivative and only available for the JDM.
|
|
|
garage19
|
| posted on 13/2/07 at 12:05 PM |
|
|
I would say the oval shaped hole is the inlet.
|
|
|
iank
|
| posted on 13/2/07 at 12:22 PM |
|
|
Casting has the look of an Eaton M45 at the back, but it looks to be a special for Toyota whoever made it.
--
Never argue with an idiot. They drag you down to their level, then beat you with experience.
Anonymous
|
|
|
MikeR
|
| posted on 13/2/07 at 01:02 PM |
|
|
i guessed it was an eaton - but i know nothing about these things.
|
|
|
ghuncha
|
| posted on 13/2/07 at 01:44 PM |
|
|
if this is of mr2(4a-gze) than its sc12... though i have my doubts for it to be sc12
|
|
|
DIY Si
|
| posted on 13/2/07 at 08:41 PM |
|
|
Don't know what it is, but the oval is the inlet and the V shaped bit is the outlet.
“Let your plans be dark and as impenetratable as night, and when you move, fall like a thunderbolt.”
Sun Tzu, The Art of War
My new blog: http://spritecave.blogspot.co.uk/
|
|
|
thomas4age
|
| posted on 14/2/07 at 04:09 AM |
|
|
stay away from that thing, the teflon seals are a complete nightmare. 8 months and beybey seals kinda thingy. was with a nevo pully though, just
little smaller than stock.
an eaton M62 would suit as a good upgrade and replacement.
grtz Thomas
If Lucas made guns, Wars wouldn't start either.
|
|
|
bimbleuk
|
| posted on 14/2/07 at 04:35 AM |
|
|
Most defintely not an SC12 or SC14 from a Toyota. Apart from its doesn't look like one! The rotrors are twisted which is an Eaton patent.
That looks more likely to be an M45 or M62 from a mercedes engine. Though as its got a simple case design it may just be an off the shelf Eaton
blower.
Looks like a gen I or II as the rotors don't look coated
|
|
|
