barrie sharp
|
| posted on 29/9/03 at 08:43 AM |
|
|
Distributors help needed
I need to buy a distributor for my 1300xflow with twin 40s on but cant get one from the usual sources( ie scrappies and blaging.)
So i get out my Demon tweeks,Europa and Burton books, phone them up and find out they cant supply them ,none avalible .
the only one i can get is for a xflow with a modifield camshaft eg bcf1,234 244 ?
The question is will my standard 1300 xflow work and run with a dizzy thats ment for a higher state of tune?
I am not intending to change my 1300s cam but want it to run for about a year before i change it to 1600/1700
thanks for your time
barrie
If theres anyone out there that wants to sell me a lucas or bosch dizzy i have good money waiting.
[Edited on 29/9/03 by barrie sharp]
the cars looking good" a blind man would be pleased to see it"
''stop press'' the blind mans seen it said "it felt ok"
|
|
|
|
|
Dusty
|
| posted on 29/9/03 at 08:54 AM |
|
|
Buy yourself a copy of Classic Ford magazine. Its a valuable resource of advertisers for old ford parts both standard and tuning.
|
|
|
barrie sharp
|
| posted on 29/9/03 at 10:28 AM |
|
|
thanks dusty i have email nearly everyone in the latest copy still havent had any response from them
still need the question answered
thanks
the cars looking good" a blind man would be pleased to see it"
''stop press'' the blind mans seen it said "it felt ok"
|
|
|
Peteff
|
| posted on 29/9/03 at 11:14 AM |
|
|
You could try the one from a valencia engine (Mk4 Escort 1300 or Fiesta) also known as the HCS engine. You should find these in the scrapyard. They
are based on crossflow.
yours, Pete.
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
|
|
|
barrie sharp
|
| posted on 29/9/03 at 01:08 PM |
|
|
hi pete got an electronic one from a fiesta and the body of it is too long worse than the standard Fomoco dizzy.
i have just been offered a bosch electronic one that fits a 1600xflow does anyone know if this will fit under the twin 40s
thanks
the cars looking good" a blind man would be pleased to see it"
''stop press'' the blind mans seen it said "it felt ok"
|
|
|
barrie sharp
|
 posted on 29/9/03 at 07:06 PM |
|
|
help please someone must know this is all that is stopping me from finishing my car
the cars looking good" a blind man would be pleased to see it"
''stop press'' the blind mans seen it said "it felt ok"
|
|
|
theconrodkid
|
| posted on 29/9/03 at 07:09 PM |
|
|
the bosch electronic one you mention is the same as fitted to late fiesta,s you can fit a fiat strada cap on that has side entry leads so the story
goes somewhere in the vaults of this list
who cares who wins
pass the pork pies
|
|
|
barrie sharp
|
| posted on 30/9/03 at 12:18 PM |
|
|
cheers conrod sent off for it hope it fits and my problems will be over.
ps. did you take you car to be sva,d at hayes?
Barrie
the cars looking good" a blind man would be pleased to see it"
''stop press'' the blind mans seen it said "it felt ok"
|
|
|
theconrodkid
|
| posted on 30/9/03 at 06:29 PM |
|
|
yup hayes is suposed to be the place to avoid,mitcham or southampton any good?
who cares who wins
pass the pork pies
|
|
|
Dusty
|
| posted on 30/9/03 at 08:36 PM |
|
|
Side entry cap was for Strada Super 75 or 85. Motocraft part no. 5005566.
|
|
|
