DrEagle
|
 posted on 11/1/04 at 01:56 PM |
|
|
Cologne V6 Spigot Bearing Fitting - HELP!!!
Please help me!!
So I have a 2.8i Cologne V6 from a Granada Auto and I want to attach a 5 Speed Manual Box on it.
I have a 5 Speed Box, Bell housing, Clutch and flywheel from a 2.8i Capri.
I also have the spigot bearing which I purchased from a Bearing Specialist, and the Adaptor Plate (metal gasket thing) from ford.
Now all I need to do is to know how to put it all together!!!!
Please can anyone tell me where to put the spigot bearing and how to do it?
Polite answers only please!
Also any tips on cleaning 20 years of grime of the box/bell housing?
Thanks
Never be afraid to try something new!
Remember that a lone amateur built the Ark with no budget,
where as a large group of professionals spent millions building the Titanic!
|
|
|
|
|
blueshift
|
| posted on 11/1/04 at 02:31 PM |
|
|
quote:
Originally posted by DrEagle
Also any tips on cleaning 20 years of grime of the box/bell housing?
"Gunk", £2, wilco
|
|
|
ChrisW
|
| posted on 11/1/04 at 04:05 PM |
|
|
Don't want to buy a nice shiney alloy bellhousing for that lot do you?? 
Chris
My gaff my rules
|
|
|
theconrodkid
|
| posted on 11/1/04 at 07:59 PM |
|
|
the spigot bearing goes in the hole in rear of the crank,use a socket to knock it in gently and only as far as to be level with the end of the crank
who cares who wins
pass the pork pies
|
|
|
DrEagle
|
| posted on 11/1/04 at 10:51 PM |
|
|
CHEERS, new it was a bit of a stupid question when i went in the garage and had a look!
Thanks for the offer of the alley Bell housing if you asked me a month ago i would have bitten your arm off, now i have 2 cast ones but would like an
alley one, only i am not brave anough to spend any more money on my Eagle at the moment, i will make use of one of the ones i have. Thanks
Simon
Never be afraid to try something new!
Remember that a lone amateur built the Ark with no budget,
where as a large group of professionals spent millions building the Titanic!
|
|
|
