Speedytriple
|
| posted on 19/4/24 at 01:30 PM |
|
|
Bike carbs on Zetec
HI Guys,
After getting my carbs setup yesterday on the Fiesta i'm having trouble with the throttle not returning properly so i guess it needs a stronger
return spring or an additional return spring adding.
Has anyone had this issue before and if so how did you sort it?
Thanks in advance.
|
|
|
|
|
Slater
|
| posted on 19/4/24 at 02:14 PM |
|
|
Hi
I had exact same issue and solved it like this in the pic. Mine is 1.8 Zetec with Kawasaki ZZR carbs.
[img]
 
Throttle Return Spring
[/img]
It's actually quite a common issue and I've posted this pic quite a few times, the link below should take you to a bunch of threads on this
subject. See under "Threads linked to this photo".
https://www.locostbuilders.co.uk/photos.php?ac
tion=showphoto&photo=throttle%20ret%20spring.JPG
Hope that helps....
Why do they call Port Harcourt "The Garden City"?...... Becauase they can't spell Stramash.
|
|
|
Speedytriple
|
| posted on 19/4/24 at 02:27 PM |
|
|
Thanks chief.
Mine's actually a bit different as it actuates on the end of the carbs with the round linkage that normally would have the 2 bike cables in
it.
I'll try to post a pic later.
Thanks
|
|
|
