Board logo

Complete engine box loom and ecu package
Non custom - 27/10/14 at 03:46 PM

Rebuilt cosworth yb engine usual stage 3 spec
T5 gearbox ,engine loom and l6 ecu for sale
£3500 collection meeseyside area

snapper - 27/10/14 at 07:09 PM

200bhp or 232 spec?

CosKev3 - 27/10/14 at 08:01 PM

quote:
Originally posted by snapper
200bhp or 232 spec?


Are you talking about the engine block,200 or 205?

Bhp wise this states stg3, so if its the classic stg3 set up it should be circa 330bhp running a T34 turbo and dark green injectors

Non custom - 27/10/14 at 08:13 PM

Should easily be 320-350 bhp as this is the usual power with a stage 3 setup
My last motor which was similar made 342 bhp on rolling road

And it's a 205 block

Non custom - 28/10/14 at 06:07 PM

Some pics as you can see it's still in car but will be removed pronto for any interested party's








Spec rundown as follows
205 block +5 bore
Pocketed pistons for bd16 inlet cam
7:2:1 comp ratio
Ported head
T35 turbo mint no play
-31 actuator
Dark green injectors
Std/std grind crank (needed for big power 500+bhp builds)
Acl dura glide shells
Big wing gated and baffled sump

Should easily see 320-350bhp and with swap of injectors ,turbo and chip should see 450+ bhp
Which should go well in kit car that weighs a crisp packet

[Edited on 28/10/14 by Non custom]

Non custom - 28/10/14 at 06:21 PM

Westifield with yb lump fitted

http://youtu.be/kvZtFUJHFV0

Non custom - 30/10/14 at 11:03 AM

Any offers before it's listed on eBay ??