Does anybody know where I can get a steering wheel spacer (about 50mm in length) that's on 100mm PCD?

All the spacers I can find seem to be on a smaller (70mm?) pitch.

Cheers

Try flak monkey on here, lives nr kings lynn.

Let me know if you find a source... I was looking recently and had a couple of possibilities which then went quiet

Simon

I couldn't find one, so I ended up making one.
I got a 4.5" diameter, 50mm long piece of ally bar from ebay.
Cut out the centre by drilling a line of holes round and using a hacksaw (took ages).
Drilled some fixing holes.
Covered in di-noc
And fixed with some long bolts (ebay again).