I brought some new wheels off of an s-type last week (they look really nice and were only £65 for four ). I wasnt sure if they would fit my donor car and it turns out that they dont
Do i need s-type uprights or hubs or something else?

ps sorry im not a mechanic and my lack of knowlege is showing

you just need to know the PCD and stud number of the wheels, and pick hubs to match. It wont be just s type ones that fit.

quick google implies they *MAY* be 5x108, which i think is granada and probably mondeo fit.

[Edited on 1/7/07 by JoelP]

S & X types are 5 stud 108mm pcd
XK's are 5 stud 120.65 pcd
pretty sure older jags shared the chevy 5 stud 4.75" pcd.

Al.

quote:

---

Originally posted by Wadders
S & X types are 5 stud 108mm pcd
XK's are 5 stud 120.65 pcd
pretty sure older jags shared the chevy 5 stud 4.75" pcd.

Al.

---

same as volvo . which are different to early jag .

i think the newer mondeos copy the volvo setup . dont think its grandad .

i think you need to stick with the correct type wheels fitted to your donor , for the correct geometry .

Not sure about the mondeo, but i just realised that 120.65mm is infact 4.75", so all real jags must have the same stud pattern, not that it helps the OP.

Al.



Originally posted by jollygreengiant

quote:

---

Originally posted by Wadders
S & X types are 5 stud 108mm pcd
XK's are 5 stud 120.65 pcd
pretty sure older jags shared the chevy 5 stud 4.75" pcd.

Al.

---

Unfortunatly, this link below doesn't cover Jags, but I'll attach it anyway for people who haven't seen it as it's very useful:

http://www.carlsalter.com/wheel_fitments.html

could also check this one out.

http://www.wheelweights.net/

whoops wrong one...hang on a mo

here you go.

http://www.alloyguide.co.uk/