Board logo

got my bushes
oadamo - 14/7/07 at 09:10 PM

after all the faffing about i bought some from wisbech engineering top service. got them the next day. they look very good quality aswell. £28.55 with stainless steel crush tubes.£3.50 of that was post.




[Edited on 14/7/07 by oadamo]

big_wasa - 14/7/07 at 09:29 PM

Can you tell me the dims please, was going to ring Yesterday and didnt get a chance.

Ie Bolt size. Width of crush tube and outer Dia of bush where it goes into the tube Please..........

oadamo - 14/7/07 at 10:05 PM

quote:
Originally posted by big_wasa
Can you tell me the dims please, was going to ring Yesterday and didnt get a chance.

Ie Bolt size. Width of crush tube and outer Dia of bush where it goes into the tube Please..........


hi wasa heres a very good pic of it pmsl.
i would of done it on paint but it looked even more poo lol.they is a gap in the middle of the bushes when there on the tube. they sell a few diff sizes. halves 55p each+vat crush tubes mild steel £1.05+vat stainless steel £1.50+vat and theres Black/blue/yellow/red/grey/green

adam



[Edited on 14/7/07 by oadamo]

big_wasa - 14/7/07 at 10:22 PM

Cheers looks like what I am after for the trailing arms

martin1973 - 14/7/07 at 10:42 PM

wasa wisbech engineering closed till tuesday . tried to ring yesterday myself

Minicooper - 15/7/07 at 08:03 AM

Are the bushes the superflex/deflex type with a bit of give or are they rock solid like the nylon/hard plastic type?

Cheers
David

oadamo - 15/7/07 at 10:00 AM

quote:
Originally posted by Minicooper
Are the bushes the superflex/deflex type with a bit of give or are they rock solid like the nylon/hard plastic type?

Cheers
David


hi there polybushes they do have a bit of give in them.
adam