I have a 160 amp tig set sitting in the garage which gets virtually no use, so it might as well go to a good home.

Its a Fimer 160A unit with HF start. Inverter type. Will include earth clamp and tig torch with a load of spares and tungstens. Its not done very much work at all - welded an exhaust and a few odd bits a pieces. Its also able to be used as an arc welder.

Got a ding on the back of the case and some overspray on it, but nothing which affects the operation.

Ideally needs a 16 amp supply, but will run off a 13amp socket for short bursts.

Looking for £200.

Also willing to swap for good quality MIG (150 amp +) - preferable in my opinion

Collection only....





[Edited on 8/3/09 by flak monkey]

Ooooo now then.... tempted..

Does Bianca come in the sale

[Edited on 8/3/09 by coozer]

Hi , might be interested but not sure where you are, Lynn, where is that?..... Dennis

quote:

---

Originally posted by coozer
Ooooo now then.... tempted..

Does Bianca come in the sale

---

second dibs if lynn is kings lynn? u have u2u

Keeping her to yourself then

I'm real keen, problem is getting back here.. where is Lynn? Does it include gas?

Kings Lynn, Norfolk.

I have been running it from dispoable bottles.

David

quote:

---

Originally posted by flak monkey
Kings Lynn, Norfolk.

I have been running it from dispoable bottles.

David

---