Hi guys.

I have 2 crossflow engines for sale, a 1300 and a 1600. I don't know too much history about either, but both turned over very easily by hand.

The 1300 is still in my striker at the moment but ready to come back out, i never had it running, it came with the car... It looks very clean though.

The 1600 i picked up from a local locoster. The engine was pretty grubby but again turned over by hand very easily. I have stripped this engine down, so head, bottom end and sump are all seperated and the camshaft and pistons have been removed. The aluminium casing on the side of the engine is damaged and will need replacing. I'll try and get a photo to show what bit i'm talking about...

Anyway, £50 each or both for £80.

Located in Horsham, west sussex.

Regards,
Andy

[Edited on 28/10/10 by pekwah1]

I thought was having the 1600 ??

steve

Shame you live so damn far away, I would have had them.

steve i u2u'd you but didn't hear anything, i thought you changed your mind... still yours... i'll u2u again.

Andy - can you read the serial number on the 1300? It's on the top surface of the block on the left side... When mine was recon'd they skimmed half the number off, and I'll need a number for IVA!

If so I'll have it... what goes around, as they say.

Jon

give me 2 mins, i'll wander up the garage and have a look!

TM242??

The ? marks are readable, just not sure it's clever putting an engine code on the net....

I don't need to know the number; just to know it's readable.
I'll have it. Let me know when you want it collected.
Jon

right now!
but seriously, most evenings are fine but i'm not going to be about much of the weekend, maybe sunday evening. Otherwise i know i'm out tuesday all day, but monday or another eve after work is fine.

I'll u2u my number...

so looks like both prov. sold!