FORMULA 27 CHASSIS & BITS - PROVISIONALLY SOLD
From a car that was SVA'd in 2004 with an old V8 engine, so future MOT emissions test will be a doddle no matter what you choose to put in it!
V5 shows age related plate ('V' suffix).
It comes with all the parts shown in the photo's... the shocks are AVO's, the oil filter adapter is Mocal, the axle is a Koln, the rack / uprights are Cortina, the front brakes are Escort, and the rear drums are 9"s. I've no idea what brand the fuel pump and oil cooler are.
The current pedal box is set up for an auto, but I guess it could be adapted for a manual.
Also comes with nosecone, rear wings and windscreen (not shown).
In good structural nick, but riddled with rivet-bodies that will need removed!
The passenger footwell panel has a hole in it and will need replaced or patched.
Price? I've not got a scooby-doo!
Feel free to debate on this thread what a fair price should be and chuck offers at me! Please bear in
mind though that this chassis is REGISTERED so NO IVA (instant £450 fee saving and major headache avoidance!). Re-build it any way you want with
whatever engine you want to use and all you will need to do is MOT it before you hit the road! I could help out with nationwide delivery at a reasonable cost!
MG KV6 ENGINE & TRIUMPH TB'S
Engine, flywheel and clutch from an MG ZS 180 as pictured.
Please note that there is no belt-train cover (I'd planned to make my own one using a thin ali sheet).
I've never run it, but it turns over freely by hand.
Comes with two sets of Triumph 675 throttle bodies which will need spaced / adapted to suit.
£300 for the lot please (£50 if you require pallet delivery).
RX7 GEARBOX
Not a lot to say really... comes with selector add bellhousing (not shown).
£125 please (£25 for delivery).
[Edited on 15/2/12 by scootz]
[Edited on 15/2/12 by scootz]
