Board logo

AO48's loads of tread!
alan87 - 23/7/12 at 12:26 PM

I have a set of Ao48's i have used for a short period of time on my fury.

2 in 185/60/r13 (fronts)
2 in 205/60/r13 (rears)

They are on 13" 4 spoke RS wheels in black et19. The wheels are not perfect and have some flaking etc. The tyres have loads of tread left!

Selling due to starting a rebuild and they wont be used for the foreseeable future.

Based near Southampton, Hampshire.

Looking for £300ono

Pictures to follow.


Fizzer - 23/7/12 at 06:10 PM

I'm v interested. How many miles have they done? any track days? Can you measure the tread?

Thnx

Andy


alan87 - 23/7/12 at 07:07 PM







I've done about 200miles max on them. I bought them from a guy on another forum who had done a couple of sprints, then was rebuilding his car so sold them on!

I'll get out to the garage in a bit and try and measure the tread depth.


alan87 - 23/7/12 at 07:27 PM

Tread is between 3-4mm


Furyous - 24/7/12 at 06:14 AM

Don't they start with only about 4.5mm from new? Barely worn.

I'd be tempted to get them as some track spares but I can't right now.

[Edited on 24/7/12 by Furyous]


alan87 - 26/7/12 at 08:27 PM

Bttt....open to reasonable offers.

Would like to buy a klde!


fullpint - 27/7/12 at 12:33 PM

Are they 13 x 7"? Need to check they will suit a Mk Indy.. How far away are you from SN13 0LF
Cheers; Steve


skippad - 27/7/12 at 02:02 PM

I'd have them for me indy, but the offsets all wrong, they'd be sticking out of the arches another 20mm!


alan87 - 27/7/12 at 05:32 PM

Hi,

They are 6" wheels.

Fullpint I'm about an hour 45mins according to google maps!


fullpint - 28/7/12 at 06:20 AM

quote:
Originally posted by skippad
I'd have them for me indy, but the offsets all wrong, they'd be sticking out of the arches another 20mm!

Bummer, I will try to have a measure up and do a little drawing just to see where the flanges would sit in my arches.. Gutted if they wont fit..