SINGLE SEATER ROLL HOOP
In good structural order... needs a lick of paint though! The legs are not equal length, so will require simple spacers.
These cost a fortune new. £75 UK delivered!
BAG TANK
Manufactured in 1994, so well out of date. That said, it looks in good nick and there are no obvious signs of wear / damage. The pump arrangment is pretty neat... the outer column has a low pressure pump attached which feeds it and acts as a swirl pot for the high pressure pump which slpis inside it. The pumps have not been tested.
Tanks with hardware dont come up often. £100 UK delivered.
PAIR OF UPRIGHTS WITH HUBS AND DISCS
This was made by our very own Welderman and I think it was to one of Rorty's designs. It has mounts for radial calipers and discs. Ths is for a pair (even though only one is pictured), Disc has light surface corosion... will come off the frst time the brakes are applied!!!
I would think that the materials and parts would easily exceed what I'm asking for them. £100 UK delivered please.
SET OF GIRLING MC'S
2 x Brake MC's and 1 x Clutch MC
Scruffy.
3/4, .670 and 5/8 (clutch)
£28 UK dellivered.
SOME OTHER 'NON-LOCOST' BITS...
Brembo F3 Calipers, Ally Bells and Discs... £450
Dallara F3 Uprights (for centrelock wheels) with Lightweight ally bells and discs... £450
Pair of 13" Speedline Corse F3 centrelock wheels... £250
Or a grand for the lot!
I also have a Dallara F3 Monsoshock assembly. Needs a good service. Comes with a Quantum damper. £200.
[Edited on 20/5/13 by scootz]
