loads of stuff for sale
Jenko - 6/12/14 at 05:56 PM
Following post builds items up for grabs:
Pair LED indicators (not e marked) hardly used- £8
Two brand new wheel bearings fit Puma, Fiesta mk4 etc - £12
2 x VW rear calipers and carriers - need a good clean ( I painted one!) - £23 - SOLD to LIAM
Indicator stalks / light / hazard etc modual - from PUMA / fiesta - £10
28mm temp sender adaptor - fits ford / omex unf senders - £5 - SOLD TO JONI
2x high quality exhaust clamps - 50mm open - £10
Trumpets from GSXR 600 TB's - £15
Manifold adaptors (not sure what they are from)40mm ID - 68mm Hole spacing - £10
Edis module, no idea if it works as I've never used it - £5
£2 / item postage, but welcome to pick up from Southampton / Winchester area
[Edited on 6/12/14 by Jenko]
[Edited on 7/12/14 by Jenko]
[Edited on 7/12/14 by Jenko]
[Edited on 7/12/14 by Jenko]
joni - 6/12/14 at 07:06 PM
Hi buddy I will take the temp sender adapter it says 28 mm is it or as you have on you add 23 ?
liam.mccaffrey - 6/12/14 at 07:06 PM
can i have first dibs on the calipers please
Jenko - 6/12/14 at 11:45 PM
Calipers sold to Liam....
19sac65 - 7/12/14 at 08:26 AM
Hi jenko
Can you tell me the id of the trumpets please
Steve
snakebelly - 7/12/14 at 09:07 AM
Any idea what the exhaust clamps will clamp down to please?
Jenko - 7/12/14 at 09:56 AM
quote:
Originally posted by snakebelly
Any idea what the exhaust clamps will clamp down to please?
All I can do is direct you to the ebay add which says 2" - They are stainless, good quality, and were £12 each
304 Stainless Steel 2"'inch Exhaust Pipe Connector coupler Heavy duty adapter
Jenko - 7/12/14 at 09:58 AM
quote:
Originally posted by 19sac65
Hi jenko
Can you tell me the id of the trumpets please
Steve
Id of trumpets is 45mm. They fit over an OD diameter of throttle body of 48mm.
Greenie - 7/12/14 at 01:57 PM
2nd dibs on the Temp sender.......
samjc - 7/12/14 at 07:02 PM
What would postage be on the clanps to doncaster as very intrested cheers.
Jenko - 7/12/14 at 07:38 PM
postage is £2 for everything here.
samjc - 9/12/14 at 04:33 PM
Can you message me a paypal adress for the clamps please.
