I lived in Ashford many years ago and went as a child with my dad to Dennis Heath for parts etc. I don't suppose Dennis snr is still around as he was getting on a bit then about 30 odd years ago
Has anyone got a rectifier for a 1995 893cc Fireblade RR-S engine for sale please. Barry
Doh... you not killed one have ya >??
Barry,
Instead of fitting the fireblade unit which is close to its limits at the best of times. See if you can find a superdream rectifier. slightly bigger
unit but much better heatsink.
Roger
Most 12v 3phase rectifiers will suit, just ebay a few for less than £5.
Just look for big cooling fins, I got a Ducati one for my 893 bec and a Honda Firestorm for my 893 blade after both fried regulators.
I replaced my CBR400RR (same as some erlay blade parts) with a spare Gsxr600 one.
Only thing was the Coils were on thier way out, and I did not find out 'till a mount later.
So I would check you Stator coil outputs as well.
Martin
If your stuck give dennis Heath a call at THE GRAVEYARD
Motor cycle breakers
29-30 Fourth cross road
Twickenham
Middlesex
TW2 5EL
0208 894 5089
Dennis Heath still going!
I lived in Ashford many years ago and went as a child with my dad to Dennis Heath for parts etc. I don't suppose Dennis snr is still around as he
was getting on a bit then about 30 odd years ago
We put one from a CB450 on my mate's bike and it works fine.
tBKM6yTNp,Q~~_2.JPG)
quote:
Originally posted by f1ngers
Dennis Heath still going!
I lived in Ashford many years ago and went as a child with my dad to Dennis Heath for parts etc. I don't suppose Dennis snr is still around as he was getting on a bit then about 30 odd years ago