Board logo

02 sensor
dunk3 - 25/9/09 at 06:27 PM

Hi all, can anyone tell me where i can get a, (02 narrow band sensor, the one with four wires) cheers.


Myke 2463 - 25/9/09 at 06:41 PM

Narrow band is std on most cars. Wiring = 2 whites 12v and earth grey and brown to ecu. loads on ebay.


David Jenkins - 25/9/09 at 06:47 PM

I found this place ages ago - no experience of their products but it's a place to start.

Gendan


britishtrident - 25/9/09 at 06:49 PM

Standard wiring for a European or US 4 wire sensor is

Black = signal output to ECU
Greay = Signal ground

White Heater12v power
White Heater ground

(White wire are obviously interchangeable)

Gendan website is the font of all knowledge on Lamba sensors
http://www.gendan.co.uk/category_113.html

[Edited on 25/9/09 by britishtrident]

[Edited on 25/9/09 by britishtrident]


mgmiller - 25/9/09 at 07:30 PM

try Autosave, its local so time time to wait for delivery


clairetoo - 25/9/09 at 08:44 PM

I've got a spare four wire sensor here - brand new , not needed as I am running a wide band - any use ?


dunk3 - 26/9/09 at 03:31 AM

HI Claire, yes would be intrested how much with postage, cheers.