After an open element type air temp sensor.

Needs to be from a ford model to make it simple.

Cheers,
David

David, I was going to use a water temp sensor because I thought it wasn't too critical. Am I right?

Steve

Hi Steve,

If you are running naturally aspirated then a normal coolant temp sensor is absolutely fine.

If running forced induction you need to use an open element type air temp sensor as they react much faster to temp changes. And hence why I need one

David

Ok, cheers, mine is N/A atm. plan is to build a turbo motor later but use the Ford EEC IV.. long term project...

try a twincam sierra one. I think that may be open.