Board logo

wtd 1.8 k series 160 vcc engine
whitstella - 7/7/12 at 04:11 PM

hi

im just putting the feelers out for a 1.8 (160 bhp) vvc engine k series engine with all things to make it run, loom ecu keys etc.

cheers steve

[Edited on 7/7/12 by whitstella]


westf27 - 7/7/12 at 04:28 PM

try pistonheads,usually on a few on there.I also got lucky and bought one off ebay.Unless you see it running b4 you buy
its always down to judgement

good luck


austin man - 7/7/12 at 04:42 PM

Just witnessed one being scrapped as it was being weighed in complete car too


whitstella - 7/7/12 at 04:59 PM

ok thanks for letting me know

when its too late just what i wanted to here. well that is how life goes as 1 door shut another is slammed in your face.

cheers steve


Humbug - 7/7/12 at 07:56 PM

There's a 1.8 here (not sure if it's a VVC)