Board logo

WTD - nose, shocks, wings, scutle....
fregis - 6/1/13 at 11:06 AM

Hi
need few parts

Nose cone - can be little damage
Scuttle - for heynes roadster (maybe fit another)
Front wings/arches- 200 wide- 2 pc
Aeroscreen
Rear arches
Shock absorbers - 4< in travel - 2pc
Springs: ~180 lbs/in 1,9 ID -4pc
Springs: ~ 280 lbs/in 1,9 ID-2 pc ( and 2 pc depend shock absorbers size)
4 point harness - 2pc

thanks

[Edited on 6/1/13 by fregis]

[Edited on 7/1/13 by fregis]

fregis - 7/1/13 at 06:34 PM

topped the list:
rear arches

fregis - 11/1/13 at 11:03 PM

bump...

fregis - 1/2/13 at 06:49 PM

bump

fregis - 1/4/13 at 08:21 PM

quote:
Originally posted by fregis
Hi
need few parts

Nose cone - can be little damage
Scuttle - for heynes roadster (maybe fit another)
Front wings/arches- 200 wide- 2 pc
Aeroscreen
Rear arches
Shock absorbers - 3< in travel - 2pc
Springs: ~200 lbs/in 1,9 ID -4pc
Springs: ~ 280 lbs/in 1,9 ID-2 pc ( and 2 pc depend shock absorbers size)
4 point harness - 2pc

thanks



[Edited on 1/4/13 by fregis]

aerodynamix - 7/4/13 at 06:26 PM

I have a wide body Westfield scuttle , the front face has been removed but would easily be covered / replaced it has had repairs before but would be cheap. I can also supply a new Aeroscreen to suit .

My Website



[Edited on 7/4/13 by aerodynamix]

tank81 - 10/4/13 at 07:52 PM

Evening,

I have a few sets of new harnesses, bagged and in mint condition... possible pairs as some out of bags too... will have to check garage....

Catch is two are out of date for MSA/FIA racing and the third has expiry of 2013!!!

Know this is OK for trackdays but not sure about IVA tests?

Have black four point, 2" straps with standard car type fastener (red button clip in type)

Black four point 3" straps with quick release twist buckle

1 x Blue TRS six point 3" straps with quick release twist buckle (2013 FIA expiry date)

Can send pics tomorrow, email me on jameskmieciak@hotmail.com or text 07920 007566

Cheers

James K

Oh... and three sets of 1.9" ID springs of (as yet) unknown rate... can check those tomorrow too if interested.

tank81 - 11/4/13 at 11:44 AM

Re: 1.9" diameter springs......

pair 9" long 250lbs/in

pair 9" long 275lbs/in

pair 7" long 300lbs/in

will sell for £10 a set + p&p

Also have 2 pairs (enough for two dampers) of aluminium converters to allow 2.25" ID springs to be mounted onto 1.9" ID dampers that I machined up for the front of my old Locost race car - £15 + p&p

Can send pics

07920 007566 or jameskmieciak@hotmail.com