Board logo

WTD: Zetec exhaust manifold and 1.8 flywheel
pekwah1 - 30/10/13 at 11:37 AM

Hi guys,

Looking for an exhaust manifold for a blacktop zetec for my striker.
Also after a 1.6 or 1.8 zetec flywheel (believe they are the same) if anyone has one lying around?

I'm near gatwick but don't mind travelling a bit...

Cheers,
Andy

HowardB - 30/10/13 at 11:59 AM

I have a 1.6 flywheel from a silver top,. located leicester,. free to collect....

pekwah1 - 30/10/13 at 12:03 PM

thanks for the offer, leicester's a bit far to go for a flywheel though

loggyboy - 30/10/13 at 12:12 PM

Im ready to be corrected, but didnt think the 1.6 one works, its an early 1.8 silvertop thats the flywheel of choice.

Charlie_Zetec - 30/10/13 at 12:24 PM

Have a home-made zetec exhaust manifold (goes over the chassis rail) available. Friend works near Gatwick, so could get it there from Essex if interested? Drop me a PM with your e-mail address if you like, and I can send pictures.

HowardB - 30/10/13 at 12:56 PM

quote:
Originally posted by loggyboy
Im ready to be corrected, but didnt think the 1.6 one works, its an early 1.8 silvertop thats the flywheel of choice.


I knew that a man that knows would be along,.. it's foc,... but no good if it dosn't fit,...

big_wasa - 30/10/13 at 04:02 PM

1.6 silvertop zetec E flywheel is the same as a 1.8 silver or black top and will fit the 2.0 silver and black top.

The 1.6 zetec SE will not fit any of the above.

loggyboy - 30/10/13 at 04:45 PM

Didnt even know there was a non SE 1.6... school day

big_wasa - 30/10/13 at 05:01 PM

There was for the silver top, 90ps model. But it was replaced with the se with the black tops.