Board logo

bonnet bulge / vent
peterparsons - 13/3/08 at 05:48 PM

where have people bought there's from, my pinto is to high and any sugestions welcome.
does anyone have one spare ?

eagle - 13/3/08 at 05:58 PM

I used the one of a l200 pickup just clears it nicely

Humbug - 13/3/08 at 06:40 PM

Eagle - have you got the dimensions of the scoop to hand? Particularly interested in:

- overall length
- width at the open end
- height in the middle at the open end

Cheers

Simon

peterparsons - 13/3/08 at 07:00 PM

Sizes for me also please.

BenB - 13/3/08 at 10:14 PM

quote:
Originally posted by eagle
I used the one of a l200 pickup just clears it nicely


Same here.... Got it off STM. I expect Aries have the moulds now....

eagle - 13/3/08 at 10:40 PM

i'm not home till tuesday if you u2u me it
will remind me to have a look when i get home

jamestziros - 15/3/08 at 08:58 PM

MNR have some nice ones but they do not have any helpful flanges to mount them with.

£50 as it surface was not well gel coated - but it is being painted